Back to Main Page
Products
Search From List

MATERIAL

>

ENGINEERING PLASTICS

>

HPM(High performance Materials)

READY-MADE
Product Information

POLYPENCO TOUGH-ROD

MC NYLON rod adhered to the core metal

 Stock Shapes

POLYPENCO TOUGH-ROD

POLYPENCO TOUGH-ROD is a complex rod with core iron and melt-adhered MC NYLON adhered with high frequency wave. Accordingly, in the inside, iron properties like key gutter or bearing set are available, and at the outside, MC NYLON self lubrication and wearing resistance are available for the application of gear or roller.
>Key Benefits
·  Compact design becomes possible.
·  Mechanical processing becomes easy.
·  Standard grade is always available.
>Grade
MC9-FC ROD(Core metal:FC25)
MC9-SC ROD(Core metal:S25C)
MC9-SUS ROD(Core metal:SUS303)
Notice
·  Please use extra-hard material for tools.
·  Please cool the processed part with plenty of cutting oil.
·  For making a hole, use the necessary-smallest diameter drill for a hole byte and then enlarge it by hole byte.
·  At cutting and shaving MC9-SUS ROD, apply low conditions as much as possible, avoiding heat generation. The speed of drill processing is preferable under 5m/min.
·  At hole making process by drill, discharge cutting powder frequently by taking out drill as many times.
·  Please take precaution so as not heated waste, exhausted from core metal, contacts MC NYLON, especially when MC NYLON is finished.
TOP

Japanese
Copyright(c) Quadrant Polypenco Japan Ltd. All rights reserved.